Features
Nylon tire cord is used in the manufacture of this type of connectors to reinforce resistance to fatigue,
  high temperature and high pressure.
Made of synthetic rubber (Neoprene) or 3-layered synthetic rubber (EPDM), this type of connectors
  has good resistance to high temperature, high pressure, abrasion, ozone, heat and oxidation in
  addition to good flexibility.
Rib has been formed inside the connector for smooth flow of liquid.
  Uses
For the points where expansion and contraction occur at pipeline
Connection of pump inlet and outlet for cooling tower and water cooling or heating unit
To secure stability of pipe joint against driving force of a machine at the time of starting
To supplement the connection of non-horizontal pipeline
To keep pipeline against impact from vibration and noise
Piping for civil engineering, architecture and equipment
Piping for chemical and power plants
  Structure of Product
Control rods are installed to protect pipeline from fracture due to excessive expansion and contraction
  when the pressure of pipeline has increased over tolerable pressure.
  Properties of Rubbers
Property/Type NEOPRENE E.P.D.M
Specific Gravity
1.15 ~ 1.25 0.91 ~ 0.93
Tensile Strength
50 ~ 250 §¸/§² 50 ~ 150 §¸/§²
Thermal Resistance
130 ¡É 150 ¡É
Cold Resistance
-35 ¡É ~ -55 ¡É -40 ¡É ~ -60 ¡É
Gasoline/ Diesel
Good Poor
Steam Resistance
Average Excellent
Uses
Adhesive agent, covering for electric wireVibration isolating rubber Covering for electric wire, window frameVibration isolating rubber
Control rods should be separately ordered.
Products over 350 are made to order.
Products requiring for pressures of over 10§¸/§² are made to order.
  Specifications (TKQ-51T)
MODEL L(mm) D(PCD)(mm) Tolerance(mm) Pressure Necessary for Control Unit
Compression Expansion
25A, 32A
150 100 20 10 Working Pressure 10§¸/§²
Test Pressure 15§¸/§²
40A
150 105 20 10
50A
150 120 20 10
65A
150 140 20 15
80A
150 150 20 15
100A
200 175 25 20
125A
200 210 25 20
150A
200 240 25 20
200A
220 290 25 20
250A
220 355 35 25
300A
220 400 35 25
For the use of special purpose, please make inquiries to us.
When you have failed to install control rods, the manufacturer does not take liability for defects,
 such as twisting, excessive expansion or contraction of piping.